NOTE: A Headset must be connected to the COGNISION™ Software before a test can be downloaded, initiated, or uploaded.
 Headset Status The Test Admin module will begin on the Headset Status tab.
|
 Headset Connection The user must first connect the COGNISION™ Software to the desired Headset.
If a Headset had been previously connected, and you are using the same Headset, select Autoconnect Last Headset to reconnect to this Headset. If no Headset had been connected, or a different Headset is to be used, you will have to use Manual Connect.
The first time you connect to a Headset you will need to select Manual Connect and press the Discover button. Any registered Headsets within Bluetooth range will be identified and displayed in the window.
NOTE: This process may take several minutes.
|
 Headset Connection Status The Status indicator will show the current connection state:
|
|
The Headset is connected and no test has been downloaded
|
|
|
The Headset is connected, a test has been downloaded, and it is ready to run
|
|
|
The Headset is connected, a test has been completed, and the data is ready to be uploaded
|
|
|
The Headset is not connected
| |
 Headset Status Confirm that the Serial Number is the same as that on the top of the HCU.
|
|
