When the test has been downloaded into the HCU, the computer screen will automatically switch to the Monitor tab.
 Test GuidanceTest Guidance Box will give commands to progress the test session
|
 Test ControlsClick Right Arrow to progress test session
Click Left Arrow to Recheck an impedance Error
|
Description
|
Key
|
Display
|
|
To begin the test press:
Baseline impedance measurements will automatically occur.
|
>
|
TAKING BASELINE
IMPEDANCES...
|
|
Individual electrode impedances are calculated.
|
|
CHECKING
IMPEDANCES...
|
|
If any individual electrode (1,2,3,4,5,6,7,R) has an impedance too high to run the test (>70kΩ), then the display will show:
|
|
CHECK 1234567R
< RECHECK OK >
|
|
Reprep the scalp for the referenced electrode and press:
|
>
|
CHECKING
IMPEDANCES...
|
|
Once all electrodes have passed the impedance check the display will show:
|
|
CHECK GOOD
< RECHECK OK >
|
|
To continue the test press:
The display will show that is playing stimulus N of a total of M:
|
>
|
PLAYING STIMULUS
N/M...
|
|
|
|
| |
|
