COGNISION 3000 Help System
×
Menu
Index
Search
 
   
   
   
 
Copyright© 2003-2015 Neuronetrix Solutions, LLC.  All rights reserved. COGNISION™ is a trademark of Neuronetrix Solutions, LLC.

Connect to a Headset

Connect to a Headset
 
NOTE:  A Headset must be connected to the COGNISION™ Software before a test can be downloaded, initiated, or uploaded.
1
Headset Status
1. Headset Status
The Test Admin module will begin on the Headset Status tab.
2
Headset Connection
2. Headset Connection
The user must first connect the COGNISION™ Software to the desired Headset.
 
If a Headset had been previously connected, and you are using the same Headset, select Autoconnect Last Headset to reconnect to this Headset.  If no Headset had been connected, or a different Headset is to be used, you will have to use Manual Connect.
 
The first time you connect to a Headset you will need to select Manual Connect and press the Discover button.  Any registered Headsets within Bluetooth range will be identified and displayed in the window.
 
NOTE:  This process may take several minutes.
3
Headset Connection Status
3. Headset Connection Status
The Status indicator will show the current connection state:
  • Connected - No Test:
The Headset is connected and no test has been downloaded
  • Connected - Test Ready:
The Headset is connected, a test has been downloaded, and it is ready to run
  • Connected - Data Ready:
The Headset is connected, a test has been completed, and the data is ready to be uploaded
  • Not Connected:
The Headset is not connected
4
Headset Status
4. Headset Status
Confirm that the Serial Number is the same as that on the top of the HCU.