COGNISION 3000 Help System
×
Menu
Index
Search
 
   
   
   
 
Copyright© 2003-2015 Neuronetrix Solutions, LLC.  All rights reserved. COGNISION™ is a trademark of Neuronetrix Solutions, LLC.

Headset Control Unit (HCU)

Headset Control Unit (HCU)
 
The Headset control Unit or HCU is the brain behind the COGNISION™ Headset System.  This handheld, battery-powered device is held by the test subject while the EEG/ERP test is being performed.
 
The HCU performs three primary functions:
 
NOTE:  The HCU contains a 3.7V rechargeable LiPoly battery.  This battery is not field replaceable.  If the device has difficulty charging, or maintaining a charge, contact customer service to request product servicing.
User Controls
1
LED Status Indicators
1. LED Status Indicators
 
LED
STATE
MEANING
On
Solid Green
Device is powered ON
On
Blinking Green
Device is being charged
Connect
Solid Blue
Device is connected through Bluetooth
Complete
Solid Green
Test finished successfully
Error
Solid Red
Test finished with errors
2
Action Buttons
2. Action Buttons
Used to capture user responses when required by an ERP protocol
3
Display
3. Display
Displays hardware and testing status.
4
On
4. On
Pressing and holding for 3 seconds will turn the unit on.
Pressing and holding for 3 seconds will also turn the unit off.
5
Special Function
5. Special Function
Used to perform various functions when prompted in the display. 
6
Forward
6. Forward
Used to move the test forward when prompted in the display. 
7
Backup
7. Backup
Used to move the test backward or recheck impedances when prompted in the display. 
8
Off Button
8. Off Button
Pressing and holding this for 3 seconds will cancel a test or turn the unit off. 
9
Connector Port
9. Connector Port
The Charge Cable or HCU Cable plugs in here.
 

Special Functions

Power Up and Self Test
 
 
 
 
Errors
A number of errors or problems may occur during the test.  See the flowchart below to learn how to correct or recover from the most common errors:
 
Reset
 
NOTE:  A reset should only be performed upon guidance from Customer Support. This will return the HCU to a normal start up state.  All tests and test data will be lost.
 
From any state except Upload Data, a soft reset can be performed.  To do so, press and hold for 3 seconds 0 + *.