Headset Cable H1300
NOTE: Either cable end can be inserted into the HCU or the Headset electronics module.
|
Earphone Cable H1501
NOTE: The Red Earphone connects to the Red Connector and the Blue Earphone connects to the Blue Connector.
|
Earphone-Right H1503
Insert Earphones, plugged into the Headset’s electronics module, are used to produce the sound stimulus for auditory ERPs. The Earphones are a type commonly used in hearing testing and are calibrated to play sounds at very precise frequencies and volumes. They consist of a small sound generator coupled to a soft foam Eartip which is inserted into the ear.
NOTE: Red is for right.
|
Earphone-Left 1502
Insert Earphones, plugged into the Headset’s electronics module, are used to produce the sound stimulus for auditory ERPs. The Earphones are a type commonly used in hearing testing and are calibrated to play sounds at very precise frequencies and volumes. They consist of a small sound generator coupled to a soft foam Eartip which is inserted into the ear.
NOTE: Blue is for left.
|
Foam Eartips D5022
Used to insert into the test subject's ear canal and block out external noise.
NOTE: The Eartips are disposable. New Eartips must be used for each testing session.
|
USB Wall Charger H1401
Used to charge the HCU.
NOTE: Only the provided charger should be used to charge the HCU.
|
Charge Cable H1400
NOTE: The USB end is inserted into the charger. The other end is inserted into the HCU.
|
Cleaning Brush H1600
Used to clean the bore of the Electrode Pods.
NOTE: The Headset, and especially the bore of the Electrode Pods must be cleaned after each use.
|
|